Hebei Lantu Pump Manufacturing Co., Ltd.-We have advanced production technology and complete testing equipment, and produce more than a dozen series and hundreds of varieties of water pump products, including slurry pumps, sewage pumps, centrifugal pumps, mud pumps, chemical pumps, desulfurization pumps, etc. They are widely used in mining, dredging, tailings transportation, concentrated ore sand, ash, coal slime, iron powder and other high-abrasive and high-concentration slurry fields. Taiming Pump's products are not only widely used in the domestic market, but also exported to many countries and regions such as North America and Europe.-D type DG type MD type DY type multistage centrifugal pump-D, DG, MD, DY multistage centrifugal pumps are segmental multistage centrifugal pumps that adopt energy-saving hydraulic models and have the advantages of energy saving, wide performance range, safe and stable operation, low noise, long life, and easy installation and maintenance. By changing the material of the pump (or the material of the flow-through part of the pump), the sealing form and adding a cooling system, it can transport hot water, oils, corrosive and abrasive media, etc.-GDF vertical stainless steel multistage pump-GDF vertical stainless steel multistage pump is designed and manufactured in accordance with JB/TQ6435-92 standard in combination with user requirements and fire-fighting standards. This series of pumps adopts a vertical segmental stainless steel shell structure, so that the pump inlet and outlet are located on the same horizontal line and have the same diameter, and can be installed in the pipeline like a valve. It also combines the advantages of high pressure of multistage pumps, small footprint of vertical pumps and easy installation of pipeline pumps.-GDL vertical pipeline multistage centrifugal pump-GDL multi-stage pipeline centrifugal pump complies with the use requirements and fire-related standards, and is designed and manufactured according to JB/TQ6435-92 standard.-DF type stainless steel horizontal multistage centrifugal pump-TSWA horizontal multistage centrifugal pumps meet the JB/T53058-93 quality standard. TSWA horizontal multistage centrifugal pump series pumps are mainly suitable for water supply and drainage of urban high-rise buildings and fire protection water, water supply and drainage of factories and mines, long-distance water transmission, water in production process circulation, HVAC circulation, domestic water and other purposes.-CDLF light vertical multistage pump-CZ type corrosion resistant alloy centrifugal pump-CZ corrosion-resistant alloy centrifugal pump has strong corrosion resistance, high mechanical strength, no aging, no toxin decomposition, and can transport acids, alkalis, oxidants and other corrosive media of any concentration. Therefore, it is widely used in chemical, petroleum, pharmaceutical, pesticide, smelting, dye, papermaking, electroplating, food and other industries.-FY vertical submersible pump-FY series submersible pumps eliminate the mechanical seal commonly used in other submersible pumps and are widely used in petroleum, chemical, pharmaceutical, papermaking, metallurgy and other industries.-IHF Fluoroplastic Lined Centrifugal Pump-IHF pump is a single-stage single-suction fluoroplastic alloy chemical centrifugal pump. It is designed and produced according to standards and combined with the processing technology of non-metallic pumps. The pump has the advantages of corrosion resistance, wear resistance, high temperature resistance, no aging, high mechanical strength, wide operating temperature range, and the conveying medium temperature is -85℃-200℃.-IH chemical pump-IH chemical pump is a single-stage single-suction cantilever centrifugal pump. Its rated performance points and size equivalents are marked according to standard ISO2858-1975 (E). It is suitable for conveying corrosive media with a temperature of -20℃ to 105℃ or media with physical and chemical properties similar to water in chemical, petroleum, metallurgy, power stations, food, pharmaceuticals, synthetic fibers and other departments.-ZA Petrochemical Process Pump-ZA chemical pump is a single-stage single-suction cantilever centrifugal pump, mainly used in petroleum, chemical, synthetic fiber, fertilizer, power station, metallurgy, food and medicine and other industrial sectors to transport clean or particle-containing liquids, low-temperature or high-temperature liquids.-ZX Series Self-priming Centrifugal Pump-ZX series self-priming pump has the advantages of compact structure, convenient operation, stable operation, easy maintenance, and strong self-priming ability. No low valve is required in the pipeline. Before working, it is only necessary to keep a certain amount of liquid in the pump body, thus simplifying the pipeline system and improving working conditions. The materials include cast iron, stainless steel, engineering plastics, and fluoroplastics.-FB type corrosion resistant pump-AFB, FB series pumps are single-stage single-suction cantilever corrosion-resistant centrifugal pumps suitable for conveying corrosive liquids without solid particles. The temperature of the conveyed medium is -20℃-150℃, and the pump inlet pressure cannot be greater than 0.2Mpa. They are widely used in industrial sectors such as petroleum, chemical industry, metallurgy, synthetic fiber, pharmaceuticals, food, brewing, etc., and can also be used for water supply and drainage in factories, mines, enterprises and cities.-ISG series vertical centrifugal pump-ISG pipeline centrifugal pump is designed and manufactured according to the performance parameters of IS centrifugal pump and pipeline pump, referring to ISO2858 and pipeline centrifugal pump standard JB/T53058-93. At the same time, hot water pump, high temperature pump, chemical pump, oil pump, etc. are derived from ISG type according to different use temperature, medium, etc.-ISW Series Horizontal Centrifugal Pump-ISW horizontal centrifugal pump is designed based on the structural combination of IS centrifugal pump and ISG vertical pump, and is an energy-saving product designed and manufactured in strict accordance with ISO2858 and JB/T53058-93 standard for pipeline centrifugal pumps. At the same time, hot water pumps, high temperature pumps, chemical pumps, oil pumps, etc. are derived from ISW according to different operating temperatures and media.-IS type centrifugal pump-S, SH type double suction centrifugal pump-S-type single-stage double-suction centrifugal pump (horizontal split case pump) is used to transport clean water or other liquids with physical and chemical properties similar to water. According to user needs, by changing the pump structure and material, it can be used to transport muddy water or various corrosive liquids. This series of pumps is suitable for factories, mines, urban water supply and drainage, power stations, farmland irrigation and drainage and various water conservancy projects.-ZX Series Self-priming Centrifugal Pump-ZX series self-priming pump has the advantages of compact structure, convenient operation, stable operation, easy maintenance, and strong self-priming ability. No low valve is required in the pipeline. Before working, it is only necessary to keep a certain amount of liquid in the pump body, thus simplifying the pipeline system and improving working conditions. The materials include cast iron, stainless steel, engineering plastics, and fluoroplastics.-ISGB series detachable centrifugal pump-ISGB type detachable pipeline centrifugal pump is designed and manufactured strictly according to the standard ISO2858 and pipeline centrifugal pump standard GB/T53058-93.-Multi-suction head vertical anti-silt sewage pump-PWDL multi-suction head vertical anti-siltation sewage pump is a new energy-saving product with anti-siltation function. It is ingeniously designed, novel in shape, simple in structure, easy to install, stable in operation, low in noise and high in efficiency. It has been used in different industries and industrial sectors, and has good anti-siltation effect, and is well received by users. Multi-suction head vertical anti-siltation sewage pump is a double-suction centrifugal impurity pump with an open impeller. It allows the solid particle size in sewage to be ≤15mm, with no specific gravity, and the instantaneous maximum allowable concentration is 30-45%. The pump is suitable for industrial production departments such as metallurgy, mining, electricity, coal, papermaking, textile, building materials, machinery, and construction departments as various slurry conveying equipment such as ore slurry, mud, mortar, etc. It can work intermittently or continuously. It is a new type of sewage pump with a wide range of applications and prospects.-PN horizontal mud pump-PN pump is a single-stage single-suction horizontal centrifugal pump. The pump inlet is horizontal and the outlet is vertical. The pump is mainly composed of pump body, impeller, guard plate, shaft, bracket (or bearing), stuffing box (or shaft seal) and other parts. The impeller is open or closed, and the pump body can be single-layer or double-layer with a jacket. It is used in mining, metallurgy, municipal construction, chemical industry, printing and dyeing and other departments to pump various slurries containing quicksand, small mud blocks, etc. It can also be used for pumping river mud, pond mud, feces, slurry beverages, etc. in rural areas; it can also be used to transport mineral sand liquid in cities and factories, and suck yellow sand and mud underground.-PNJ, PNJF rubber pump-PNJ and PNJF rubber pumps are single-stage single-suction centrifugal rubber-lined pumps (rubber-lined slurry pumps), which can transport various slurries without sharp solid particles. The maximum concentration of the transported slurry does not exceed 65% (by weight), and the temperature does not exceed 60°C. The two pumps have the same structure but different materials. PNJF pumps are specially used for transporting corrosive slurries.-YZ new centrifugal mud pump-YZ new centrifugal slurry pump and sediment pump are a new generation of pump products developed and produced based on the latest research results of fluid mechanics at home and abroad: the impurity pump developed by the solid-liquid two-phase flow theory.-PN(L) Mud Pump-This series of pumps are single-stage, single-suction centrifugal mud pumps. PN is horizontal and PNL is vertical. The flow-through parts are made of wear-resistant alloy materials, and PNJ is made of rubber material with long service life. The shaft seal uses general packing seal, and the shaft seal should be injected with clean water 1 kg/cm2 higher than the working pressure during operation.-DT desulfurization pump-DT desulfurization pump is a single-stage single-suction horizontal centrifugal pump, mainly used as a circulating pump for absorption towers, with the advantages of wide flow range, high efficiency and energy saving, simple structure, and convenient maintenance. It is an ideal product for desulfurization and slag removal in power plants.-STR(L) desulfurization pump-Product Overview STR (L) series desulfurization pumps are designed for the characteristics of flue gas desulfurization systems in thermal power plants and are mainly used as circulating pumps for absorption towers in wet FGD units.-Fluorine lined anti-corrosion desulfurization pump-Fluorine-lined anti-corrosion desulfurization pumps are widely used in power, chemical, steel, mining and other industries. They are mainly used to transport highly corrosive slurries in desulfurization and denitrification systems, such as limestone slurry, gypsum slurry, sulfuric acid and other corrosive media, and are suitable for handling media containing solid particles. The pump has good corrosion resistance and wear resistance, ensuring long-term stable operation under harsh working conditions.-WD (F), WG (F) sewage pump-WG horizontal sewage pump, corrosion-resistant sewage pump product use This series of horizontal sewage pumps is suitable for pumping liquids below 80°C with fibers or other suspended matter. Sewage pump 80WG sewage pump dimensions diagram It is used for cities and industrial and mining enterprises to remove sewage and feces, for construction, farmland drainage and irrigation, sewage in the process of enterprises and institutions, suction and discharge. In addition to conveying sewage, it is also suitable for use as a drain pump, paper pump, irrigation, etc. Horizontal sewage pumps are suitable for the discharge of seriously polluted wastewater from factories and commerce, sewage discharge stations in main residential areas, water distribution systems of urban sewage treatment plants, drainage stations of civil air defense systems, water supply equipment of water plants, sewage discharge from hospitals and hotels, municipal engineering construction sites, mine ancillary machines, rural biogas pools, farmland irrigation and other industries. It can convey sewage and dirt with particles, and can also be used for clean water and weakly corrosive media.-YW type submersible sewage pump-YW submersible sewage pump adopts single (double) channel impeller, with strong sewage discharge capacity, and can effectively pass fibers 5 times the diameter of the pump and solid particles 50% of the diameter of the pump. The dynamic seal adopts two sets of special material hard alloy mechanical seals, made of cast iron and stainless steel.-ZW self-priming sewage pump-ZW self-priming pump is suitable for urban environmental protection, construction, fire protection, chemical industry, pharmaceutical industry, dye printing and dyeing, brewing, electricity, electroplating, papermaking, petroleum, mining, equipment cooling, tanker unloading and other fields. It is also suitable for clean water, seawater, water and chemical medium liquids with acid and alkalinity and slurry medium with general paste. The viscosity is ≤100 centipoise and the solid content can reach less than 30%. When equipped with a rocker arm nozzle, it can flush water into the air and scatter it into fine raindrops for spraying. It is a good machine for agricultural pesticides, nurseries, orchards and tea gardens.-LW vertical sewage pump-LW vertical sewage pump adopts single (double) channel impeller, with strong sewage discharge capacity, and can effectively pass fibers 5 times the diameter of the pump and solid particles 50% of the diameter of the pump. The dynamic seal adopts two sets of special material hard alloy mechanical seals, made of cast iron and stainless steel.-PW (F), PWL sewage pump-The ordinary type of PW sewage pump can transport sewage, suspended solid particles, long fiber materials and domestic wastewater. The pump body is made of high-quality cast iron, and the medium temperature does not exceed 100°C. When the PW sewage pump treats industrial sewage, due to fiber entanglement in the sewage, etc., a filter must be installed at the water inlet end of the pump to prevent impurities from entering the pump cavity, so that the pump can work better and have a longer life.-QW (WQ) submersible sewage pump-The QW (WQ) submersible sewage pump adopts a unique single-blade or double-blade impeller structure, which greatly improves the sewage passing capacity and can effectively pass fibrous materials 5 times the pump diameter and solid particles with a diameter of about 50% of the pump diameter. The mechanical seal adopts a new hard and corrosion-resistant titanium tungsten material, which can make the pump run safely and continuously for more than 8,000 hours. The overall structure is compact, small in size, low in noise, and has significant energy-saving effects. It is easy to repair and maintenance. There is no need to build a pump room. It can work by submerging in water, which greatly reduces the project cost.-AS_AV type tear submersible sewage pump-AS series submersible sewage pumps are suitable for conveying liquids containing hard solids and fibers, as well as particularly dirty, sticky and slippery liquids. AS pumps are equipped with adjusted tearing devices that can tear long fibers, bags, belts, grass, cloth strips, etc. in sewage and discharge them. Therefore, they will not be blocked when working in sewage and are extremely reliable.-AHR Rubber Slurry Pump-Pump body, pump cover and flow-through parts: This series of pumps are horizontal, vertical, double-casing slurry pumps. The pump body and pump cover are equipped with replaceable metal liners made of high-chromium wear-resistant alloy material. The liners can be used until worn out, extending the maintenance cycle and reducing operating costs. The outlet direction of the pump can be rotated and installed at 8 angles. Bearing assembly: The bearing assembly of the pump adopts a cylindrical structure, which is convenient for adjusting the gap between the impeller and the front guard plate, and can be removed as a whole for maintenance. The bearings are lubricated with grease.-M.AH.HH slurry pump-Shaft seal (seal): The shaft seal types of the pump include packing seal, impeller seal, and mechanical seal. Transmission mode: There are V-belt transmission, elastic coupling transmission, gear reduction box transmission, hydraulic coupling transmission, frequency conversion drive device, thyristor speed regulation, etc. Among them, V-belt transmission includes CL, CV, CR, ZL, ZV, and ZR transmission.-SP Series Submersible Slurry Pump-65QV-SP(R) submersible slurry pump is a single-shell, vertical submersible slurry pump without shaft seal. It needs to be immersed in a pit when in use. It is a model with high market demand for submersible slurry pumps. The flow parts of 65QV-SP(R) submersible slurry pump are made of high chromium wear-resistant alloy (A05) and rubber lining. 65QV-SP(R) submersible slurry pump is a foreign technology with advanced structure, stable and reliable performance and easy installation.-ZD Series Single Shell Slurry Pump-ZD series slurry pump, this series of single shell slurry pump has the characteristics of full range of models, stable performance, wide coverage of working conditions, convenient selection, etc. The flow-through parts are made of self-developed high-chromium wear-resistant alloy with high efficiency, energy saving, long service life, light weight, reasonable structure, reliable operation, low vibration, low noise, easy maintenance, etc.-ZGB Series Slurry Pump-ZGB slurry pump adopts multiple speeds and multiple variants to make the pump run in industrial and mining environments. It has a long service life and high operating efficiency, and can meet a variety of harsh transportation conditions. It has significant advantages such as long life of wearing parts, high efficiency, low energy consumption, easy maintenance, low operating costs, and high reliability.-ZJL Series Submersible Slurry Pump-It is widely used in electric power, metallurgy, mining, coal, building materials, chemical industry and other industrial sectors. It is mainly used to transport abrasive slurry containing solid particles. It can be immersed in a pool or pit to work and does not require any shaft seal or shaft seal water.-ZJW filter press feed pump-ZJW-II filter press special feed pump is an impurity pump with special performance. In recent years, it has been recognized by the industry as "filter press special feed booster pump". The pump sucks slurry from the rear side, with simple packing seal and no leakage. More importantly, its flow rate and head curve are very steep, which is very suitable for some special industrial and mining industries.-ZJ Industrial Slurry Pump-ZJ industrial slurry pumps are widely used in electric power, metallurgy, mining, coal, building materials, chemical industry and other industrial sectors. They are mainly used to transport abrasive slurries containing solid particles, such as processing concentrates and tailings in ore dressing plants, removing ash and slag in power plants, transporting coal slime and heavy medium coal preparation in coal preparation plants, and transporting ore slurry, etc.-ZJ type slurry pump-This product is efficient, energy-saving, has a long service life, is light in weight, has a reasonable structure, is reliable in operation, and is easy to maintain. It is suitable for industries such as electricity, metallurgy, coal, and building materials. The processing medium is an abrasive or corrosive slurry containing solid particles. The solid-liquid mixed concentration of mortar is 45%, and that of ore slurry is 60%. The medium temperature is ≤60°C. This type of pump can be used in multiple stages in cascade.-AF Foam Pump-Application range: widely used in metallurgy, mining, coal, chemical industry, power plant, environmental protection, municipal engineering and other industries. The pump can effectively eliminate the foam in the slurry when working, and can still work normally when the incoming material is insufficient. It is especially suitable for various flotation processes and is an ideal product for conveying foam slurry.-YW type submersible sewage pump-YW submersible sewage pump adopts single (double) channel impeller, with strong sewage discharge capacity, and can effectively pass fibers 5 times the diameter of the pump and solid particles 50% of the diameter of the pump. The dynamic seal adopts two sets of special material hard alloy mechanical seals, made of cast iron and stainless steel.-SP Series Submersible Slurry Pump-65QV-SP(R) submersible slurry pump is a single-shell, vertical submersible slurry pump without shaft seal. It needs to be immersed in a pit when in use. It is a model with high demand in the current submersible slurry pump market. The flow parts of 65QV-SP(R) submersible slurry pump are made of high chromium wear-resistant alloy (A05) and rubber lining. 65QV-SP(R) submersible slurry pump is a foreign technology with advanced structure, stable and reliable performance and easy installation.-ZJL Series Submersible Slurry Pump-It is widely used in electric power, metallurgy, mining, coal, building materials, chemical industry and other industrial sectors. It is mainly used to transport abrasive slurry containing solid particles. It can be immersed in a pool or pit to work and does not require any shaft seal or shaft seal water.-FY vertical submersible pump-FY series submersible pumps eliminate the mechanical seal commonly used in other submersible pumps and are widely used in petroleum, chemical, pharmaceutical, papermaking, metallurgy and other industries.-YZ new centrifugal mud pump-YZ new centrifugal slurry pump and sediment pump are a new generation of pump products developed and produced based on the latest research results of fluid mechanics at home and abroad: the impurity pump developed by the solid-liquid two-phase flow theory.-PN(L) Mud Pump-This series of pumps are single-stage, single-suction centrifugal mud pumps. PN is horizontal and PNL is vertical. The flow-through parts are made of wear-resistant alloy materials, and PNJ is made of rubber material with long service life. The shaft seal uses general packing seal, and the shaft seal should be injected with clean water 1 kg/cm2 higher than the working pressure during operation.

Language

List

Phone

info@cn-pumps.cn

Top

Online

Contact now →

List

Phone

info@cn-pumps.cn

Top

D type DG type MD type DY type multistage centrifugal pump

GDF vertical stainless steel multistage pump

GDL vertical pipeline multistage centrifugal pump

DF type stainless steel horizontal multistage centrifugal pump

CDLF light vertical multistage pump

ZX Series Self-priming Centrifugal Pump

FB type corrosion resistant pump

CZ type corrosion resistant alloy centrifugal pump

FY vertical submersible pump

IHF Fluoroplastic Lined Centrifugal Pump

IH chemical pump

ZA Petrochemical Process Pump

ISG series vertical centrifugal pump

ISW Series Horizontal Centrifugal Pump

IS type centrifugal pump

S, SH type double suction centrifugal pump

ZX Series Self-priming Centrifugal Pump

ISGB series detachable centrifugal pump

Multi-suction head vertical anti-silt sewage pump

PN horizontal mud pump

PNJ, PNJF rubber pump

YZ new centrifugal mud pump

PN(L) Mud Pump

DT desulfurization pump

STR(L) desulfurization pump

Fluorine lined anti-corrosion desulfurization pump

WD (F), WG (F) sewage pump

YW type submersible sewage pump

ZW self-priming sewage pump

LW vertical sewage pump

PW (F), PWL sewage pump

QW (WQ) submersible sewage pump

AS_AV type tear submersible sewage pump

AHR Rubber Slurry Pump

M.AH.HH slurry pump

SP Series Submersible Slurry Pump

ZD Series Single Shell Slurry Pump

ZGB Series Slurry Pump

ZJL Series Submersible Slurry Pump

ZJW filter press feed pump

ZJ Industrial Slurry Pump

ZJ type slurry pump

AF Foam Pump

YW type submersible sewage pump

SP Series Submersible Slurry Pump

ZJL Series Submersible Slurry Pump

FY vertical submersible pump

YZ new centrifugal mud pump

PN(L) Mud Pump

Production center

Company Profile

Company Culture

Honor

Blogs

Service market

Cooperation Process

Client Service
and Technical Support

Contact Information

Online Message

Home Product ISW Series Horizontal Centrifugal Pump

View All Categories

Product Center

Multistage pump

Chemical pumps

Centrifugal Pumps

Mud pump

Desulfurization pump

Sewage pump

Slurry pump

Submersible pump

ISW Series Horizontal Centrifugal Pump

ISW horizontal centrifugal pump is designed based on the structural combination of IS centrifugal pump and ISG vertical pump, and is an energy-saving product designed and manufactured in strict accordance with ISO2858 and JB/T53058-93 standard for pipeline centrifugal pumps. At the same time, hot water pumps, high temperature pumps, chemical pumps, oil pumps, etc. are derived from ISW according to different operating temperatures and media.

info@cn-pumps.cn

model	Flow Q		Lift	efficiency	Speed	Motor power	Allowable NPSH
	m/h	l/s	m	%	r/min	KW	m
50-125A	11	3.05	16	57	2900	1.1	2.3
50-160	12.5	3.47	32	52	2900	3	2.3
50-160A	11.7	3.25	28	51	2900	2.2	2.3
50-160B	10.4	2.89	22	50	2900	1.5	2.3
50-200	12.5	3.47	50	46	2900	5.5	2.3
50-200A	11.7	3.25	44	45	2900	4	2.3
50-200B	10.6	2.94	36	44	2900	3	2.3
50-250	12.5	3.47	80	38	2900	11	2.3
50-250A	11.6	3.22	70	38	2900	7.5	2.3
50-250B	10.8	3	60	37	2900	7.5	2.3
50-250C	10	2.78	52	36	2900	5.5	2.3
50-100(I)	25	6.94	12.5	69	2900	1.5	2.5
50-100(I)A	22.3	6.19	10	67	2900	1.1	2.5
50-125(I)	25	6.94	20	68	2900	3	2.5
50-125(I)A	22.3	6.19	16	66	2900	2.2	2.5
50-160(I)	25	6.94	32	63	2900	4	2.5
50-160(I)A	23.4	6.5	28	62	2900	4	2.5
50-160(I)B	21.6	6	24	58	2900	3	2.5
50-200(I)	25	6.94	50	58	2900	7.5	2.5
50-200(I)A	23.5	6.53	44	57	2900	7.5	2.5
50-200(I)B	21.8	6.06	38	55	2900	5.5	2.5
50-250(I)	25	6.94	80	50	2900	15	2.5
50-250(I)A	23.4	6.5	70	50	2900	11	2.5
50-250(I)B	21.6	6	60	49	2900	11	2.5
50-315(I)	25	6.94	125	40	2900	30	2.5
50-315(I)A	23.7	6.58	113	40	2900	22	2.5
50-315(I)B	22.5	6.25	101	39	2900	18.5	2.5
50-315(I)C	20.6	5.72	85	38	2900	15	2.5
65-100	25	6.94	12.5	69	2900	1.5	2.5
65-100A	22.3	6.19	10	67	2900	1.1	2.5
65-125	25	6.94	20	68	2900	3	2.5
65-125A	22.3	6.19	16	66	2900	2.2	2.5
65-160	25	6.94	32	63	2900	4	2.5
65-160A	23.4	6.5	28	62	2900	4	2.5
65-160B	21.6	6	24	58	2900	3	2.5
65-200	25	6.94	50	58	2900	7.5	2.5
65-200A	23.5	6.53	44	57	2900	7.5	2.5
65-200B	21.8	6.06	38	55	2900	5.5	2.5
65-250	25	6.94	80	50	2900	15	2.5
65-250A	23.4	6.5	70	50	2900	11	2.5
65-250B	21.6	6	60	49	2900	11	2.5
65-315	25	6.94	125	40	2900	30	2.5
65-315A	23.7	6.58	113	40	2900	22	2.5
65-315B	22.5	6.25	101	39	2900	18.5	2.5
65-315C	20.6	5.72	85	38	2900	15	2.5
65-100(I)	50	13.9	12.5	73	2900	3	3
65-100(I)A	44.7	12.4	10	72	2900	2.2	3
65-125(I)	50	13.9	20	72.5	2900	5.5	3