Phone

Top

What are the common causes and solutions for slurry pump failures?

2024-09-26

 

Below we introduce you to the common faults and solutions of slurry pumps:
First, the water pump does not produce water, and the pressure gauge pointer jumps violently
Reason: 1. The water inlet is blocked; 2. The pipeline and the instrument are leaking;
Method: 1. Discharge the blockage; 2. Tighten or block the leak;
Second, the pressure gauge indicates that there is pressure at the pump outlet, but the pump still does not produce water
Reason: 1. The resistance of the outlet pipe is too large and the impeller is blocked; 2. The number of revolutions is insufficient;
Method: 1. Check the pipeline; 2. Clean the impeller; 3. Increase the number of revolutions of the pump;
Third, the power consumption of the submerged slurry pump is too large
Reason: 1. The water supply of the pump is too small (or fully closed); 2. The impeller is worn;
Method: 1. Open the gate valve of the outlet pipe; 2. Replace the impeller;
In addition, we introduce you to the three common inspection methods of the underarm slurry pump: 1. Check the pipeline; 2. Clean the impeller; 3. Increase the number of revolutions of the pump. Under common circumstances, submerged slurry pumps will have some faults. You can use these three methods to check your equipment first

Related Blogs

Contact Us